Untitled Diff
3 removals
| Words removed | 2 |
| Total words | 273 |
| Words removed (%) | 0.73 |
83 lines
2 additions
| Words added | 3 |
| Total words | 274 |
| Words added (%) | 1.09 |
83 lines
AXN3.8_8397_3333_96.1151100.1.bin Release Note
20191023 GGA86_AXN3.8_N4_9600_9020105004A.bin Release Note
Item Default setting unit
Item Default setting unit
------------------------------------- ----------------------- ------------
------------------------------------- ----------------------- ------------
------------------------------------- ----------------------- ------------
------------------------------------- ----------------------- ------------
Flash Allow Change of Factory Default Disable
Flash Allow Change of Factory Default Disable
-------------------- ------------ --------
-------------------- ------------ --------
UART baudrate 9600 bps
UART baudrate 9600 bps
-------------------- ------------ --------
-------------------- ------------ --------
Allow Change of UART Baudrate Enable
Allow Change of UART Baudrate Enable
-------------------- ------------ --------
-------------------- ------------ --------
Fix update rate 1000 ms
Fix update rate 1000 ms
-------------------- ------------ --------
-------------------- ------------ --------
NMEA Sentence Output
NMEA Sentence Output
-->GLL Disable
-->GLL Disable
-->RMC Enable
-->RMC Enable
-->VTG Enable
-->VTG Disable
-->GGA Enable
-->GGA Enable
-->GSV Enable
-->GSV Enable
-->GSA Enable
-->GSA Enable
-->ZDA Disable
-->ZDA Disable
-------------------- ------------ --------
-------------------- ------------ --------
Optimize TTFF Enable
Optimize TTFF Enable
-------------------- ------------ --------
-------------------- ------------ --------
Satellite Elevation Mask 5 degree
Satellite Elevation Mask 5 degree
-------------------- ------------ --------
-------------------- ------------ --------
Nav Speed Threshold Disable
Nav Speed Threshold Disable
-------------------- ------------ --------
-------------------- ------------ --------
Datum WGS84
Datum WGS84
-------------------- ------------ --------
-------------------- ------------ --------
Initial Position Latitude 90 degree
Initial Position Latitude 90 degree
-------------------- ------------ --------
-------------------- ------------ --------
Initial Position Longitude 0 degree
Initial Position Longitude 0 degree
-------------------- ------------ --------
-------------------- ------------ --------
Product model Titan3
Product model Titan3
-------------------- ------------ --------
-------------------- ------------ --------
Build ID 0x8397
Build ID 0x8397
-------------------- ------------ --------
-------------------- ------------ --------
Firmware Write Protection Disable
Firmware Write Protection Disable
-------------------- ------------ --------
-------------------- ------------ --------
DGPS mode SBAS
DGPS mode SBAS
-------------------- ------------ --------
-------------------- ------------ --------
SBAS Search Enable
SBAS Search Enable
-------------------- ------------ --------
-------------------- ------------ --------
AIC(Active Interference Cancellation) Enable
AIC(Active Interference Cancellation) Enable
-------------------- ------------ --------
-------------------- ------------ --------
Internal LNA Gain Low
Internal LNA Gain Low
-------------------- ------------ --------
-------------------- ------------ --------
TCXO Freq Error 2.5 ppm
TCXO Freq Error 2.5 ppm
-------------------- ------------ --------
-------------------- ------------ --------
1PPS Output Enable
1PPS Output Enable
-------------------- ------------ --------
-------------------- ------------ --------
1PPS Output pin Default mode
1PPS Output pin Default mode
-------------------- ------------ --------
-------------------- ------------ --------
1PPS Logic Duration 100 ms
1PPS Logic Duration 100 ms
-------------------- ------------ --------
-------------------- ------------ --------
1PPS Availability Enable 3D fix only
1PPS Availability Enable 3D fix only
-------------------- ------------ --------
-------------------- ------------ --------
LOCUS Default setting Disable
LOCUS Default setting Disable
-------------------- ------------ --------
-------------------- ------------ --------
LOCUS logging type Full&Stop
LOCUS logging type Full&Stop
-------------------- ------------ --------
-------------------- ------------ --------
Logging Content Basic
Logging Content Basic
-------------------- ------------ --------
-------------------- ------------ --------
LOCUS HW IF Internal Flash
LOCUS HW IF Internal Flash
-------------------- ------------ --------
-------------------- ------------ --------
Logging Area Data Size 128 KB
Logging Area Data Size 128 KB
-------------------- ------------ --------
-------------------- ------------ --------
Logging Mode
Logging Mode
-->AL Disable
-->AL Disable
-->Fix only Enable
-->Fix only Enable
-->Normal Disable
-->Normal Disable
-->Interval Enable 15 sec
-->Interval Enable 15 sec
-->Distance Disable
-->Distance Disable
-->Speed Disable
-->Speed Disable
-------------------- ------------ --------
-------------------- ------------ --------
GPIO
GPIO
-->Fix-LED GPIO 6
-->Fix-LED GPIO 6
-------------------- ------------ --------
-------------------- ------------ --------
Standby PIN NA
Standby PIN NA
*Note: If Aiding in flash enabled, fix update rate be fixed @ 1Hz.
*Note: If Aiding in flash enabled, fix update rate be fixed @ 1Hz.